Advertisement

  • Howto Solve Cisco SDM May Not Operate with Custom Configuration File ?

    Howto Solve Cisco SDM May Not Operate with Custom Configuration File ?

    The following example shows a configuration that contains the CLI commands Cisco SDM requires in order to operate.


    hostname yourname
    !
    logging buffered 51200 warnings
    !
    username cisco privilege 15 secret 0 cisco
    !
    ip domain-name yourdomain.com
    !
    interface FastEthernet0
    description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-10/100 Ethernet$
    ip address 10.10.10.1 255.255.255.248
    description PC must be on the same subnet as this interface
    no shutdown
    !
    ip http server
    ip http secure-server
    ip http authentication local
    ip http timeout-policy idle 60 life 86400 requests 10000
    !
    line vty 0 4
    privilege level 15
    login local
    transport input telnet
    transport input telnet ssh
    line vty 5 15
    privilege level 15
    login local
    transport input telnet
    transport input telnet ssh

    Cari artikel yang lain


0 comments:

Leave a Reply

Subscribe to: Post Comments (Atom)

Featured Video

Photos